ZORum
Build it, Run it, Break it, Repeat! => Badpig build => Topic started by: zorproducts on January 21, 2016, 07:02:13 PM
-
Starting with a pretty good base point here.
-
What all do you have in store for this one???
Also, can I come to the party?
-
Looking forward to this!! 2up
-
When I first bought it...
-
a few more after a lift and tires
-
On list is
remanufactured 1.6 16v converting an OBD2 to an OBD1 harness and computer
Trans and t-case redos
Sky YJ
Over Top Heavy duty fj80 steering
Dash redo
A very long list we won't have car for about 10 days so more pics coming
-
It's Gone!!!!!!! Thank y'all for coming this far to get my ride. I can't wait to see what you can do!!
-
Pictures coming soon. Engine is out, Trans is out, engine bay getting striped and ready for media blasting.
-
(http://www.zuksoffroad.net/forum/proxy.php?request=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160209%2Fe4def71b5bb581b7a184ace21827d02f.jpg&hash=3b838919197ed417727f05166798b451)
(http://www.zuksoffroad.net/forum/proxy.php?request=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160209%2F5d7b902ef230fbfc6b8af04d5684befd.jpg&hash=f9128a227fe79c7da340467f0c80b0cb)
Nick
Sent from my iPhone using Tapatalk
-
Goodbye (insert derogatory comments about my competitors here) stickers, that Nick so carefully cropped in photo, lol.
-
This is the rear seat I was mentioning to you. A corbeau(sp)
-
I know we are both super busy I need to get a real suspension quote done for you and hear how much the ceramic coating will cost me for your engine, need to decide yea or nay. On a super tight schedule the engine is here and I want to move on this to beat deadline for once.
-
thats crazy lookin. NO MOTOR. Glade y'all know what goes where.
-
Some old and new pics are slowly coming in as we fix the bad spots
-
More
-
And more
-
More
-
This is where we got enough back from painter to start reassembling. Going to do some chopped narrower ZOR rockbiters to squeeze in between the metal fenders. We are going for a military look but not desert rat striped down except for a machine gun look. More like a mobile light armory vehicle with supplies to get the mission finished look.
Shops been working hard to get back on these builds and we are looking forward to the normalcy of assembly. Pictures coming soon.
-
KANT WAIT!!!!
-
Time to show some pics.
-
thumbs up
-
The furry thing (kangaroo rat) stopped by today.
-
thumbs up thumbs up thumbs up
-
"RJG79"
-
I'm so stoked.. For both of us.. Lol
Sent from my iPhone using Tapatalk
-
Been assembling this project for awhile
Ran into burnt harness now the whole harness has been opened and repaired. Someone tried before but left yards of melted wires.
-
Been assembling this project for awhile
Ran into burnt harness now the whole harness has been opened and repaired. Someone tried before but left yards of melted wires.
OH Crap! Thanks for finding all that. looks like a fire waiting to happen.
-
Steps
And new fuel pump
A bad pig inspired change to tube doors
-
Rollers are always a good thing. The YJ sit moves the front axle forward and the rear axle back. This provided more clearance
-
Dropping this in Monday.
-
Paul is killing this project now. Yahoo baby.
-
I am digging this ceramic coating more and more. Unlike Powdercoating it actually cleans up nice.
-
Looks very nice. I always wondered what a clean engine bay looked like.
-
So fresh and so clean clean...