Barak STYLE SPECS:
This Heavy Duty Rear Bumper was designed to use Dual LED lights that
you can buy at most trucking/auto supply stores. Includes all HD mounting hardware and a Class3 receiver. Does not include the reverse lights shown. As always with ZOR products it will be an EZ install, some minor cutting of the stock license plate holder may be needed
You can install the rubber OEM bumper ends on this ZOR bumper. Some state's require illuminated plates, you have to rearrange and illuminate your license plate for those states.
MATERIAL:
3/16th" flat steel plate
CNC punch pressed then folded on a 100 ton press.
Heavily welded in corners and seams for strength and durability.
COST:
extra - welded on D-rings (set of two measuring
5/8ths" thickness)
MOUNTING:
Utilizes a six point bolt to frame system.
This Heavy Duty Rear Bumper uses only your stock SAMURAI park / brake / turn / reverse signals that mount into the bumper like your stock lights. The "STOCK" style only includes protective screen for the side corner lights.
MATERIAL:
3/16th" flat steel plate, CNC punch pressed then folded on a 100 ton press. Heavily welded in corners and seams for strength and durability.
Utilizes a six point bolt to frame system. Shown with the optional "Guapo" ZOR tire carrier.
INCLUDED:
2" heavy duty class3 receiver supported across the frame with 2" steel flat bar. Grade 8 bolts and nut plates,
MOUNTING:
As always with ZOR products it will be an EZ install, some minor cutting of the stock license plate holder may be needed. All hardware included. Illustrated instructions
You can install the rubber OEM bumper ends on this ZOR bumper. Some state's require illuminated plates, you have to rearrange and illuminate your license plate for those states.
Introducing the new "GUAPO" tire carrier with adjustable Hi-lift (farm jack) mount. Specifically designed for any ZOR rear bumper. The support plate mounts from to the Samurai lower frame and is welded on the top of the ZOR bumper. This new design will fit Tin Tops, Fiberglass tops and Soft top Samurais in all years (86-95) . Also great for DIYs who make their own bumper.
MATERIAL:
2.5" x 2.5" Square tubing with threaded "T-handle" quick release. Utilizes two oversized tapered bearings and a 7/8th" grade 8 pivot bolt.
INCLUDED:
Illustrated Instructions
Spare tire bracket is set up to hold yota (6 bolt) AND zuki (5 bolt) rims.
Adjustable mounting system for (hi-lift) & farm type jacks. This mount can be used in a vertical or horizontal position. Shipped unwelded! Optional:
New style one piece bracket to hold your Gas Can shelf/tray add $24.95
INSTALLATION:
We prefer to sell these with our ZOR bumpers at time of purchase. We build the Tire Carrier to your specific design and then weld the pivot bracket onto your ZOR bumper.
