I thought I'd make this thread as a build log showing what I'm doing to my little runabout that I'm building to fit in my toy-hauler camper.
Here is what I'm starting with. A completely stock '87 rag-top (I did add the wheels and 235/75r15 tires).
(https://i.imgur.com/c36fEMc.jpg)
Doing some disassembly to prep for paint. Pulling off the flairs and lower rocker trim, I did find some rust that needed to be repaired. I chose to cut out the rot and replace it with some square tubing that will eventually be tied in to the frame as rock-sliders.
(https://i.imgur.com/KeaNAOQ.jpg)
(https://i.imgur.com/51hC33q.jpg)
While the car is being painted I got my Dr. Z bumper kits.
(https://i.imgur.com/ok0XEqz.jpg)
(https://i.imgur.com/LDfpKPe.jpg)
Back from paint. She's not a show winner, but I only wanted a passable 30 footer. It's actually an accepotible 10 footer...
(https://i.imgur.com/yfU5MUt.jpg)
Out comes the dash for cleaning all the duct work and heater core. While it's out I will prep for Raptor Liner on the inside.
(https://i.imgur.com/fpolx9I.jpg)
Prep for Bedliner
(https://i.imgur.com/sbgeDBz.jpg)
Sprayed
(https://i.imgur.com/mMs6RyP.jpg)
Demasked
(https://i.imgur.com/Gzvjx3z.jpg)
Interior going back in
(https://i.imgur.com/I59uiOj.jpg)
That is very nice.
Phase one complete.
(https://i.imgur.com/PFdvaW4.jpg)
(https://i.imgur.com/jQ4G84h.jpg)