ZuksOffRoad Forum

Quote from: BrokenMotorMount on Mar 25, 2024, 04:00 PMIs the firing order correct?

Yes I have it correct i learned that my new timing light had a degree advance that I was supposed to adjust it to correspond to the degrees on the flywheel or pulley.
it running a bit better but haven't had any backfires but still is sluggish and bogs down but not as bad.

Is the firing order correct?

I have my resting idle speed at 800/850ish  and am at 10 degrees at 3000 feet on the bell housing view window, however, I am still getting sluggish results and hesitation and at times I hear backfire coming from the intake when going from 1s to 2nd, 2nd to 3rd and when in 3rd if I increase the accelerator too much it bogs out unless I downshift. the air filter is brand-new  and have capped all unused vacuum lines "I think" 

Thank you 🙏🤙🏼

bouncing back and forth between projects, worked on the suburban a bit after work till the wind picked up. So then we got the second tire mounted for the Samurai... 2 in 2 months lol

There are currently about 90 videos on the Zuksoffroad YouTube channel. To save space on this forum search on YouTube Zuksoffroad channel or click this link.

https://youtube.com/@Zuksoffroad

The thread pitch for that sender is m12x1.5, it is not a pipe thread.  If you can find a m12x1.5 male by 1/4'' FIP adaptor that would be a good place to add a temp sender.  I was going to use that port for the temp sender for the electric fan I added but the threads were a hassle so I ended up using a sender port location under the carb which you can see just behind the MS2 mount.

Try Figmo's site, he carries alot of the stock stuff.  I believe the name is roadlessgear.

Welcome.

Hi,
I've been into Zuks for years and owned 7 of them. I recently bought a 1986 Zuki project and am working on getting it on the road and off. Cheers to all!